Low Weight, Relliable, and Affordable. Plantraco’s Sub Gram receivers range from 0.38g up to 0.9 grams, and they control one motor and 2 magnet actuators! The patent pending Bahoma battery connector is another weight savings - no more heavy wire connectors. It’s low weight, and it saves you even more weight as a result of it’s good design. Range of 300 feet or more is no problem, and this is with antennas that measure only a few inches! No more dangly antennas hanging from your model. Frequency change is user selectable on the transmitter - crystal changes are gone forever.
These components can be transferred between your models, and are compatible with all other Plantraco components too. The Deluxe Starter Sets are a great investment for a person who wants to get started in the Micro R/C Flying and Building hobby. RTF planes are great, but it is in building models that you will advance your skills, capabilities and enjoyment.
Our HFX series receivers are the lightest model airplane receivers ever to be manufactured! Glitches are Gone with pure digital 900Mhz RF link. Crystal changes are gone too - you can select your channel from the transmitter at startup. LED and audible tones report battery status and frequency. Low volt detection is automatic. Antenna only needs to be a few inches, and for indoor flying a 1 inch antenna can work just fine. Several receiver models available from 0.3 gram to 0.9 grams weight. No soldering required for the 0..9 gram receiver with microconnectors. Even beginners can build sub ounce R/C model airplanes with this reliable, tiny, state-of-the-art receiver!
Magnetic actuators do the work that a conventional servo does in an R/C aircraft. We selected the proven 1.1 gram BSD MiniAct magnetic actuators for our HFX series receivers. There are many R/C airplane designs that can use these powerful and reliable actuators and the new low weight connector plug and socket system means that you won’t have to do any soldering to set up your model - just plug them into the HFX 0.9 gram receiver. You can also have fun by trying your hand at making your own magnetic actuators for next to nothing!
Fidgeting with your batteries micro connectors can be a huge inconvenience for tiny models. Instead, try Plantraco’s patent pending Bahoma connector - it is a zero force connector, and it does not add extra weight to the airplane with un-needed lengths of (heavy) wire. Bahoma stands for BAttery HOlder using MAgnets, and once you see that you can connect your battery to your airplane or charger in 1 second flat - we think you will agree that our Bahoma battery connector is the way to go for powering Micro R/C models. Bahoma really means Convenience, Safety and ultra low weight Performance! (cell included with HFX R/C Sets)
Here’s what you’ll get in the Deluxe Starter Set #3:
Micro9 3 Channel PlugnPlay 0.9g Receiver • Approx 0.9 gram weight • Outputs for single motor and 2 actuators, ideal for rudder and elevator control or V-tail elevon control • Plug and Play nanoconnector sockets for your actuators and motors - no soldering needed • 10mm Bahoma battery terminals for quick and easy battery connections • LED and Audible Tones to indicate status and frequency number (6 frequencies) • Built-In Low Voltage Cutoff protects your Lithium cells from over-discharge
HFX900 Transmitter with 10mm Bahoma charger built-in • 900Mhz ISM band USA, 868Mhz EU - FCC and CE certified • 4 CH transmitter - Full Proportional • 6 User Selectable frequencies • Exponential and V-Tail mixing modes • Built-In lipoly Bahoma charger for LP90 Bahoma cells • Requires 4 AA cells
2 pcs of 90mAh Bahoma Lipoly Cell
2 pcs of MiniAct 1.1g magnetic actuator with nanoconnectors to plug into receiver with ease
7mm 1.7Ohm Direct Drive Motor and nanoconnector to plug into receiver with ease
We are shipping to you from our home town of Saskatoon, Saskatchewan, Canada.
Our on-line store runs on Shopify.
Most items MUST be shipped with trackable service. You will receive a tracking number by Email when your order is accepted.
You will receive shipping quotations from the Shopify shipping system and we will process your order as efficiently as possible.
If shipping seems too high - let us know. We will be examining every order and evaluating the shipping costs. Again - most items MUST be shipped with trackable service.
We love happy customers. All Plantraco products are designed with passion and genuine love for the R/C hobby and model building and cool electronic gadgetry and gizmos. It's never really been work for the boss, but there is also a lot of paperwork and stuff, and those guys at Plantraco do have to do work I guess. Oh well. Anyway, we pledge to you that we will always do the right thing. Check out our common sense policies on Returns and Repairs and also on Privacy. We will not collect your data and sell it - that's not our interest. We want to sell you our awesome R/C Toys and hobby products and you want to buy them :)